This diagram shows the order of work in the method. The accompanying table shows the first few changes in the method and the first work you do as you move around the circle.
|2||(2)LL2L2L23..||Whole lead, then snaps and||3/4 Up|
|3||(3)4554334..||Out, 3rds from the back, then||Long Fifths|
|5||(5)5433455..||One blow in fifths, 3rds from the back, then||3/4 Down|
|4||(4)32L2L2L..||In, then snaps and||2nds|
This table illustrates how you will be affected if the conductor calls a Bob or Single. If you are not about to do the work tabled, continue the work unaffected. Note:- When unaffected the places will stay the same but order you meet the bells changes.
|Bob Called||Single Called|
|Do This||Next Work||Do This||Next Work|
|Run In, Do the work of the 2nd place bell, snaps and out.
|3/4 Up||Turn over 3rds and Out, Do the work of the 3rd place bell.
|Run Out, Do the work of the 3rd place bell.
|Long 5ths||Unaffected||3/4 Up as usual|
|Make the Bob, Do the work of the 4th place bell. In then snaps.
|2nds||Run Out, Do the work of the 5th place bell.
|Unaffected||3/4 Down as usual||Two blows in 5ths, Do the work of the 4th place bell. In then snaps.
Tip: If a Bob or Single is called take the same action as in Plain Bob for example at 3/4 Up 'Making the Bob', other pieces of work 'Run In', 'Run Out' etc. are the same too. However the actual work that follows is different in this method.
This method is very similar to St Martin's Bob Doubles, the snaps either side of 2nds in this method are replaced by 2nds places in St Martin's.
Printed from RINGBELL.CO.UK/METHODS